- Glass tube
- alumina ceramic
- Zirconia ceramic
- Metalization-Ceramic
- silicon carbide heater
- Si3N4&SiC
- Ceramic fiber board
- fused silica tubes
- Mosi2 heating elements
- U Mosi2 heating elements
- W Mosi2 heating elements
- L bent Molybdenum disilicide heating elements/mosi2 heater
- steatite ceramic
- Metallic heating elements
- zirconia ceramic screws
- Ceramic washers
- Tube furnace
- Graphite crucibles
- dental furnace for sintering
- Thermocouple
- Grinding jar
- Boron nitride disk/disc
- Add:Changjiang Road #665, Changzhou city, Jiangsu province,China 213000
- Tel:+86-0519-6659865
- Fax:+86-0519-6674895
- E-mail:hrotoor@163.com
- Contacts:Allen Wazhe
INTRODUCTION:
Our products and services
contribute to our customers' productivity, reliability and cost efficiency
while reducing their environmental impact in a wide variety of industry
segments.
In partnership with customers,
we jointly develop products and materials that meet the challenges of the
future.
The Heating Elements Factory of
ZHOK MATERIAL is a manufacturer of silicon carbide heating elements, trade name
ZHOK MATERIAL SiC and molybdenum disilicide heating elements, trade name ZHOK
MATERIAL MoSi2.
The ZHOK MATERIAL heating
element has a maximum use temperature of 1700 C. The MoSi2 element can operate
up to an element temperature of 1800 C, and new 1900 C.
Product
Description
ZHOK MATERIAL MoSi2
heating elements can quickly form a thin and adhesive anti-oxidizing layer
of quartz glass (SiO2), under the high temperature oxidizing condition. If the
protective layer was damaged, the element can reform a new one, so MoSi2
Heater Molybdenum Disilicide Heating Elements have a very good anti-oxidation
properties, it also means that the heating element can be used on operation for
a much longer time than the traditional one.It
is used to the highest temperature up to 1850C during oxidizing
atmosphere. According to your request, our company can produce the products of
Rod , "U", "W"
and "U"-right angle ,"W'---right shapes, etc.
Molybdenum disilicide MoSi2 heating
elements
1) Material grade
:M1700,M1800,M1900.
2) ZHOK MATERI dimension
(mm):3/6,4/9,6/12,7/14,9/18,12/24.
Physical property
volume density
5.5~5.6g/cm³
bend strength
5.5~25kg/cm²
vickers-hardness
(hv)570kg/mm²
porosity rate
7.4%
water absortion
1.2%
hot extensiblity
4%
Recommend Surface load Molybdenum
disilicide heater MoSi2 heating elements
Furnace Temp (C )
1400
1500
1600
1650
1700
Surface load of hot
zone(w/cm2)
<18
<15
<12
<10
<8
Size: Heater Molybdenum Disilicide MoSi2 Heating Elements
Diameter of Hot Zone (D1):mm
Diameter of Cold End (D2):mm
Length of Hot Zone (Le):mm
Length of Cold End (Lu):mm
Shank spacing (A):mm
For example:
D1=6mm, D2=12mm, Le=200mm, Lu=180mm, A=30mm
Please specify as: dia6/12x200x180x30mm (D1/D2 x Le x Lu x A m