PRODUCT CATEGORIES
- Glass tube
- alumina ceramic
- Alumina Tube
- Alumina plate
- Alumina crucibles
- alumina milling jar
- Alumina Washer
- alumina plug
- steatite ceramic
- alumina fateners
- alumina sheaths
- Zirconia ceramic
- Metalization-Ceramic
- silicon carbide heater
- Si3N4&SiC
- Ceramic fiber board
- fused silica tubes
- Mosi2 heating elements
- steatite ceramic
- Metallic heating elements
- zirconia ceramic screws
- Ceramic washers
- Tube furnace
- Graphite crucibles
- dental furnace for sintering
- Thermocouple
- Grinding jar
- Boron nitride disk/disc
FEATURED PRODUCT
CONTACT US
- Add:Changjiang Road #665, Changzhou city, Jiangsu province,China 213000
- Tel:+86-0519-6659865
- Fax:+86-0519-6674895
- E-mail:hrotoor@163.com
- Contacts:Allen Wazhe
Your position:Home > Product Show
INTRODUCTION:
99.7 alumina boat Rectangular cruciblesHigh purity alumina (Al2O3 content > 99%) ceramics are ideal for high temperature applications. Re-crystallised alumina is used in crucibles as it offers the best thermal shock resistance due to the larger grain size (up to 200m m is advantageous)
Chemical component
Al2O3≥99
R2O≤0.2
Fe2O3≤0.1
SiO2≤0.2
Vol.density(g/cm2) ≥3.80
Apparent Porosity(%)<1
Bending Strength (Mpa)>350
Compression strength (Mpa)>12000
Permittivity ∑(1MHz)2
The max.operating temperature 1800
Specification: 5ml 10ml 15ml 20ml 25ml 30ml 50ml 100ml 150ml 200ml-2500ml
Points:
High alumina purity:al2o3>99%,good corrosion resistance.
High temperature resistance,1600C in long use,1800C in short use.
Good thermal shock,no easy to crack.
High slip casting density
Purpose
Main purpose of crucible and sagger is as a container for analysis and firing of material and product applied in various industries. For example: analysis of coal, melting of the metal, analysis and firing of chemical raw materials, analysis and melting of glass, analysis and firing of rare earth materials and mineral,firing of hightemperature items such as ceramic products and melting of single-crystal raw materials.
Use Under normal circumstances,firstly put the items which need to be analyzed and fired into the crucible or sagger.Then heat. The speed of heating and drop in temperature are according to the characteristics of equipment and products, fast or slow.Because of the thermal expansion of raw material which the crucibles and saggers are made of, too quick heating or cooling will easily lead to cracking of the crucibles and saggers.The best way is slowing down,which can prolong the life of them.
For inquirys, please indicate W H BL
PREVIOUS:alumina crucibles with lids
NEXT:1800 Mosi2 heating elements