- Glass tube
- alumina ceramic
- Zirconia ceramic
- Metalization-Ceramic
- silicon carbide heater
- Si3N4&SiC
- Ceramic fiber board
- fused silica tubes
- Mosi2 heating elements
- U Mosi2 heating elements
- W Mosi2 heating elements
- L bent Molybdenum disilicide heating elements/mosi2 heater
- steatite ceramic
- Metallic heating elements
- zirconia ceramic screws
- Ceramic washers
- Tube furnace
- Graphite crucibles
- dental furnace for sintering
- Thermocouple
- Grinding jar
- Boron nitride disk/disc
- Add:Changjiang Road #665, Changzhou city, Jiangsu province,China 213000
- Tel:+86-0519-6659865
- Fax:+86-0519-6674895
- E-mail:hrotoor@163.com
- Contacts:Allen Wazhe
INTRODUCTION:
Our products and services contribute to our customers' productivity, reliability and cost efficiency while reducing their environmental impact in a wide variety of industry segments.
For applications where the furnace roof is particularly low, the use of horizontally mounted elements can be used. In such cases, four-shank elements might be used where the surface temperature of the element will not exceed 1800 deg C. Available in Grade MD-31 in 3/6, 4/9, 6/12, 9/18 and 12/24 sizes. The multi-shank elements have advantages over two-shank elements in that the hot zones are longer, therefore fewer elements can be used and the cold end losses are reduced.
In partnership with customers, we jointly develop products and materials that meet the challenges of the future.
The Heating Elements Factory of ZHOK MATERIAL is a manufacturer of silicon carbide heating elements, trade name ZHOK MATERIAL SiC and molybdenum disilicide heating elements, trade name ZHOK MATERIAL MoSi2.
The ZHOK MATERIAL heating element has a maximum use temperature of 1700 C. The MoSi2 element can operate up to an element temperature of 1800 C, and new 1900 C.
Product Description
ZHOK MATERIAL MoSi2 heating elements can quickly form a thin and adhesive anti-oxidizing layer of quartz glass (SiO2), under the high temperature oxidizing condition. If the protective layer was damaged, the element can reform a new one, so MoSi2 Heater Molybdenum Disilicide Heating Elements have a very good anti-oxidation properties, it also means that the heating element can be used on operation for a much longer time than the traditional one.It is used to the highest temperature up to 1850C during oxidizing atmosphere. According to your request, our company can produce the products of Rod , "U", "W" and "U"-right angle ,"W'---right shapes, etc.
Molybdenum disilicide MoSi2 heating elements
1) Material grade :M1700,M1800,M1900.
2) ZHOK MATERI dimension (mm):3/6,4/9,6/12,7/14,9/18,12/24.
Physical property
volume density |
5.5~5.6g/cm³ |
bend strength |
5.5~25kg/cm² |
vickers-hardness |
(hv)570kg/mm² |
porosity rate |
7.4% |
water absortion |
1.2% |
hot extensiblity |
4% |
Recommend Surface load Molybdenum disilicide heater MoSi2 heating elements
Furnace Temp (C ) |
1400 |
1500 |
1600 |
1650 |
1700 |
Surface load of hot zone(w/cm2) |
<18 |
<15 |
<12 |
<10 |
<8 |
Size: Heater Molybdenum Disilicide MoSi2 Heating Elements
Diameter of Hot Zone (D1):mm
Diameter of Cold End (D2):mm
Length of Hot Zone (Le):mm
Length of Cold End (Lu):mm
Shank spacing (A):mm
For example:
D1=6mm, D2=12mm, Le=200mm, Lu=180mm, A=30mm
Please specify as: dia6/12x200x180x30mm (D1/D2 x Le x Lu x A m